H-20 PEM Fuel Cell - 20W
When looking to procure fuel cell stacks for new product development, testing or system integration, you are likely to find the best possible value at Horizon Educational. We offer the widest range of standard “off-the-shelf” PEM fuel cell systems. Our standard systems are simple, efficient, and feature some of the highest power densities available in the world – opening new possibilities for university projects.
- Miniature electronic valve
- Control electronics
- Integrated fan and casing
- Low voltage protection
- 20W stack with blower
Fuel Cell Stack 20W
Additional Information
While the H-20 can be purchased without any supporting components, Horizon Educational recommends contacting us to build a total package in order to more effectively integrate the product into your project. You can click here to fill out a quote request form if you would like to create a complete package that includes the fuel cell stack and required supporting components.
Fuel Cell and Hydrogen
Safety Requirements
Do not connect or disconnect power cables when the fuel cell stack is turned on. Warranty is void if the fuel cell stack is disassembled or otherwise altered. Hydrogen is a colorless, odorless, and flammable substance. Always operate and store the fuel cell stacks and hydrogen storage canisters in an area with ample ventilation. Fuel cell systems should always be equipped with a highly accurate hydrogen sensor to detect any leaking hydrogen within the system or from the hydrogen storage canister. Please refer to the H-20 User Manual to see a complete list of the safety requirements for the product.
Fuel Cell Stack 20W Quick Product Facts
Number of Cells
This fuel cell stack is composed of 13 fuel cells.
Hydrogen Pressure
Hydrogen must be fed into the fuel cell stack at a pressure of 0.45-0.55 Bar.
Ambient Temperature
The fuel cell stack operates best in a temperature ranging from 41 to 86° F / 5-30°C.
Humidification
This fuel cell stack uses self-humidification.
FC Stack Weight
Stack weight (including fan and casing) is 0.60lb / 275g.
System Efficiency
At full power the efficiency of the system is 40%.
H-20
Performance: 7.8V @ 2.6A
Hydrogen consumption at rated power: 0.28l/min.
Stack dimensions: 7.5 x 4.7 x 7.0cm
List of H-20 components:
1 x filter
2 x black plastic pin
1 x valve
2 x inlet/outlet gas fitting (M3-4)
1 x 20W fuel cell stack
1 x controller
1 x silicon tube (OD 4 x ID 2.5mm), 50cm long